In the morning of 29 Beijing, the Canadian International Trade Tribunal said on Monday that it had launched a preliminary antidumping investigation of steel imported from China, South Korea and Vietnam.

In the past week, it has risen by 100 yuan/ton continuously. In December, the steel export of steel mills will be reduced. At that time, the domestic market will increase, and the pressure on the downstream steel companies or traders will increase.

Futures and spot plunging to today have many reasons overlapped, but falling to a certain extent, bottoming out should also be said to be a natural law of the market or a general trend.

The trading atmosphere of the thick-walled seamless steel pipe market continued to decline from last week, and it continued to fall due to the policy of the mainstream first-tier manufacturers last weekend.

Seamless steel pipes have become very common in life, so do you know that seamless steel pipes can be divided into several grades?

After the heat treatment of the 45# seamless steel pipe, it is necessary to wait for it to cool before proceeding to the next step. The cooling method of 45# seamless steel pipe changes with the change of its manufacturing materials. For most steels, natural cooling can be used. For some special 45# seamless steel pipes, to ensure its Organizational state, physical properties and mechanical properties are developing in the expected direction, and certain methods and systems must be adopted.

　　The chemical composition specified in the general standard refers to the smelting component. It refers to the chemical composition of the 45# seamless steel pipe after smelting and pouring. In order to make it representative, the analysis is carried out according to the specified standard method (GB/T223). The results must conform to the standard chemical composition range and be the basis for customer acceptance.

The primary industry and real estate formed support for investment in January-February. The national fixed asset investment (excluding farmers) was 444.6 billion yuan, a year-on-year increase of 7.9%. The growth rate was 0.7 percentage points higher than the previous year, which was higher than the market 7%. expected. In this regard, many institutions believe that mainly due to real estate investment and investment in the primary industry exceeded expectations.

The crude steel output is growing too fast. The oversupply pressure in the steel industry shows that under the background of high steel prices, steel companies have begun to increase their productivity.

Proceso de producción de tubería de acero con costura recta (LSAW) de soldadura por arco sumergido d

In general, with the end of the "two sessions", the domestic coking coal production will be gradually released in the later period, but the coking coal stocks of steel mills and coking plants are not at a relatively low level, and the focus enterprises in Hebei and Shanxi have environmental protection limits.

　From 2017 to 2018, as the downstream steel market gradually lost from loss to obvious profit, the ferroalloy industry has considerable profit margins.

　After the opening on March 20, the main contract of iron ore fell by nearly 5%, and the disk was always dominated by oscillations, with the largest drop of 5.65%, ending at 5.10%. Market analysts said that the reason was mainly related to the official release of the Danshui Valley on March 19, Brazil, saying that Minas Gerais was partially affected by the mine disaster and the mining area was about to resume production.

Precision spiral steel pipe is a kind of high-precision steel pipe after cold drawing or hot rolling. Because the inner and outer walls of precision spiral steel pipe have no oxide layer precision spiral steel pipe, high pressure and no leakage, high precision, high smoothness, no cold deformation, flaring, flattening without cracks, etc., it is mainly used to produce pneumatic or hydraulic components.

Burn-through and hydrogen-induced cracking in spiral steel pipe welding are hot topics at home and abroad. There are many influencing factors of these problems, including spiral steel pipe body, pre-weld treatment, welding process and post-weld treatment.

With the continuous development of China's economy, the country vigorously develops the energy industry. Pipeline long-distance oil and gas pipelines are an important way of energy security. In the anti-corrosion construction process of oil (gas) pipelines, the surface treatment of anti-corrosion spiral steel pipes determines the service life of pipelines. One of the key factors is the premise that the anti-corrosion layer and the steel pipe can be firmly combined. According to the research institute's verification, the life of the anti-corrosion layer depends on the coating type, coating quality and construction environment. The surface treatment of the anti-corrosion spiral steel pipe affects the life of the anti-corrosion layer by about 50%. Therefore, it should be strictly in accordance with the anti-corrosion layer. Standardize the requirements on the surface of steel pipes, continuously explore and summarize, and continuously improve the surface treatment methods of steel pipes.

　　Skin turning of billets 　　The steel billet is a process for removing the surface defects and scale of the round billet and processing the specified outer diameter and a certain surface finish. The turning amount and turning accuracy are determined by the diameter of the billet and the type of steel. The amount of turning is shown in Table 4-2. The amount of turning varies according to the conditions of each factory, and is roughly in the range of 3.5-15 mm. The turning amount increases as the diameter of the billet increases. Stainless steel has more surface defects than ordinary carbon steel and low alloy steel, and its turning amount is also larger.

The cut steel pipe is inspected according to technical requirements. The inspection includes checking the size and bending of each pipe and the quality of the inner and outer surfaces of the pipe, and sampling the mechanics and process performance, but the inspection requires sampling. The inspection of the geometrical dimensions and bending of the steel pipe can be carried out on the inspection table, or it can be continuously detected by an automatic size detecting device such as laser caliper, thickness measurement, and length measuring instrument.

　　There are many types of steel pipes and different uses, so their technical requirements are different and production methods are different.

　　The intermediate wave is formed at the side of the precision stainless steel strip and half of the center (1/4 inch from the side). The main reason is that the shape of the blank is not good and the intermediate roll shape curve is incorrect or the position is incorrect. The buck is a defect formed by the different English love in the thickness direction of the steel strip. The main reason is the result of the bending of the work rolls in the horizontal direction and the surface condition lubrication conditions of the upper and lower work rolls and the work mixed wear. Its manifestation is that it is rolled up laterally to form a "funnel shape".

　　Since the surface of the stainless steel tube will form a thin protective film, although the protective film is about 3×10-6 mm, it is very tough. Even if it is destroyed, as long as there is oxygen next to it, it can be regenerated immediately to prevent rust. As long as you know the characteristics of stainless steel and use it correctly.