abrasion The Al2O3 content of the ceramic inner lining reducer is more than 95%, and the microhardness is HV1000-1500. It has high wear resistance, and the wear resistance is ten times higher than that of the quenched carbon steel, and the superior tungsten carbide bit. corrosion The ceramic material is neutral, chemical property is stable, has excellent corrosion resistance and acid resistance, resistant to various inorganic acids, organic acids, organic solvents, its stainless steel corrosion degree is more than ten times. temperature The temperature is above 2000 degrees Celsius, and it works in the range of -50celsius~900 degrees Celsius for a long time. Easy welding Ceramic adjustable pipes can be welded, flanges, flexible connectors and other fast connections, very easy to install. Clean, easy to maintain The wall is smooth, which can prevent fouling, dirt and self cleaning function. Seal.

1, power plant pipe pulverizing system, including powder pipeline, thick powder separation pipe, coal dropper, wind pipe combustion system, two wind pipe, three pipe and burner pipe, except ash system discharge pipe, powder pipe, dry ash conveying pipe; 2, raw material pipeline of iron and steel plant, collecting pipe, dust collection pipe, ash pipe, ash pipe, mixing pipe, grinding outlet pipe, coal pipe, coal pipe, separation pipe, burner radius pipe, etc. 3, the cement plant chooses machine outlet pipe, choose machine inlet pipe, pipe dust removal pipe, vertical mill outlet pipe, circulating air duct, high temperature blower, blanking pipe and so on. 4, petroleum, chemical, mining, coal, coal washing plants, smelting, paper making, aluminum, building materials, powder engineering, food machinery and other processing and conveying materials pipes

Low carbon steel tubes are made of ceramics with high wear resistance and resistance to fluid erosion. In the wind pipe, the wear rate of the pipe is the fastest, and the wear resistance of the ceramic lined steel pipe elbow is more than five times higher than that of the steel elbow. In practical application, the ceramic lined steel pipe has been observed and measured 1-2 years after opening the hole. The composite layer has no obvious wear or loss, the size of the unit and the length of the pipe are the same. The weight of the ceramic lined steel pipe is about 1/2 with the weight of the wear-resistant steel pipe or the double metal composite pipe. The construction cost is reduced by 30-40% per meter, and only the cast stone weight steel pipe is used. And rare wear resistant 2/5 around 20% per meter below the cost of the project. The cost of ceramic lined steel pipes is only a small part of stainless steel tubes and nickel titanium pipes when they are corroded or used in high temperature.

According to data from the Korean steel plate distribution industry, the Korean toll tax has been raised from the previous 10,000 won/ton to 12,000 won to 15,000 won/ton since the beginning of this year. The relevant industry also requested that the fee be raised to 18,000 won / ton. It is understood that there are still some unsold materials in the relevant Korean market, and the tolls of some unsold materials are charged according to the previous standard of 10,000 won/ton.

In the first half of July, the international steel market was first suppressed and then raised. In the middle of the month, the global steel benchmark price index of 123.7 points rose by 0.3% on a week-on-week basis. Among them: flat steel index was 116.4 points, up 0.1% on a week-on-week basis (up from down); long product index was 131.8 points, up 0.6% on a week-on-week basis (up from down); Asia index was 125.7% points, down 0.1% on a week-on-week basis ( The decline converges). The China index in Asia was 128.5 points, which was flat on a week-on-week basis (from flat to flat); the Americas index was 143.3 points, down 0.2% on a week-on-week basis (from ups and downs); the European index was 107.3 points, up 1.4% on a week-on-week basis. Based on the market operating situation combined with the fundamentals forecast, the international steel market in the second half of July may continue to fluctuate.

The ceramic tube is the corundum and the inner corundum. The hardness of corundum layer Vivtorinox is 1100-1500 (Rockwell hardness 90-98), equivalent to tungsten cobalt hard gold. The high wear resistance is 20 times higher than that of the carbon steel pipe. It is superior to the ordinary corundum grinding wheel. It is still a variety of corundum grinding wheel grinding hardened steel main wheel. The ceramic Guan Gangyu corundum wear layer can be picked up. The wear-resistant ceramic tube corundum layer can be formed mainly by a few millimeters thick, the Moir hardness is 9, second only to the diamond and the silicon carbide, all oxides, this is the highest hardness. Only about 20% of alumina, most of which are SiO2, SiO2 Moir hardness is 7. rare high chromium wear resistant alloy tube or Vivtorinox hardness is about 400 (Rockwell hardness is about 50), and the hardness of corundum is third. Therefore, the wear resistance of wear-resistant alloy steel pipe and casting pipe is a qualitative leap from the composition and structure, and the thickness of ceramic tube compared with them.

Ceramic lined steel composite pipes have excellent wear resistance. The service life of materials used in hard abrasives is 20 times longer than that of ordinary steel pipes. The combination of high rigidity and high elastic steel makes the pipes unrivalled and can be used as wear-resistant, heat-resistant and corrosion resistant materials in the fields of power generation, metallurgy, mining and chemical industry.

The steel should meet the requirements of chemical composition, tensile properties and hardness. Water pressure test should be carried out in every pipe. In addition, each pipe should be inspected according to the required practice by NDT. Mechanical test requirements for different pipelines, such as lateral or longitudinal tensile tests, flattening tests and hardness or bending tests, are presented. The ends of each box will indicate order number, heat number, size, weight and binding or as required.

Hyundai Steel Corporation announced on July 9 that the company's H-beam prices will increase from July 18. It is understood that the price of Hyundai Steel's light H-beam will increase by 30,000 won / ton, and the closing price will be adjusted to 840,000 won / ton. In addition, Hyundai Steel's heavy H-beam prices will increase by 40,000 won / ton, the price per ton will be adjusted to 1 million won; the price of extra-thick H-beam will increase to 1.06 million won per ton. Hyundai Steel said that the price increase reflects the increase in costs in the first half of this year. The preferential policies in long-term contracts are not affected by this price adjustment.

Ceramic Lined Lateral pipe Wye from a single spool piece to complete piping systems.

Since June 21, the price of hot rolled coil in the Midwest has remained above US$1,000/ton (up from US$6/ton to US$1009/ton on July 10). This is the price of US steel, represented by hot rolled coil, has once again exceeded $1,000/ton since October 17, 2008. For the reasons for the skyrocketing US steel prices, the industry believes that: First, the United States imposes a 25% high tariff on imported steel products; secondly, speculation has fueled US steel prices; finally, the US steel market is in strong demand in 2018. .

In July, Korean cold-rolled flat product manufacturers began to increase prices. Among them, South Korea's Eastern Steel has identified new price tags, and other companies such as South Korea's Dongkuk Steel and South Korea's Shiya Group also participated in the price increase. According to industry sources, South Korea's Eastern Steel has issued a notice to increase the price of all cold-rolled flat products by 40,000 won/ton since July 16. South Korea's Dongkuk Steel and South Korea's Shiya Group announced that their cold-rolled flat products prices will increase by 50,000 won / ton.

EN 10217 welded steel pipe for pressure purposes.

Standard: API 5D Application: For well drilling

The Japanese industrial standard (JIS) developed by the organization is applicable to various industrial services and technologies, such as automobiles, metallurgy, ships and medical equipment.

Expansion joints are designed to safely absorb the movement in pipework systems due to heat-induced expansion and contraction of pipework.

Ceramic Lined Reducer Pipe with flange

Ceramic Lined Elbows and Bends could be also applied in the parts of concrete pump owing to their advantages especially the low weight which helps to avoid the jam during the transport of concrete.

Abrasion resistant Straight pipe

President Vučić praised the acquisition of the Chinese company on day 5 for the success and progress of the Smederevo steel plant in Serbia. Vucic made the above statements during the celebration of the second anniversary of the official takeover of the Smeder Revo steel plant by Hegang Serbia. He thanked the workers for their efforts to achieve the corporate objectives and emphasized the importance of steel mills in the city of Smederevo and the entire Serbian economy.

According to the data from the Korea iron and Steel Association, the total volume of billets imported from Korea decreased by 11.2% in January ~5 to 255694 tons. From the source of imports, Japan is the only source of South Korea's billet import growth, and Japan's exports to South Korea have risen by 22% to 175252 tons, while other countries have declined over the same period.